Skip to main content
All posts

10 Hiring Problems Engineering Managers Brought Us in 2026

By Jason Eisenberg · Head of Marketing6 min read
Close-up of a populated circuit board with rows of capacitors and colored connectors on a workbench, shot with a shallow depth of field.

We went back through our 2026 intake calls with engineering hiring managers. Here are the ten hiring problems that kept coming up, from tape-out dates and program ramps to retirements, on-site requirements and loops that moved too slowly.

Every req starts as a problem somebody is already living with… a milestone that won't move, or a team that has been covering two jobs since spring. By the time a hiring manager calls us, that problem has a history, and the history usually tells us more than the job description does.

For our year-end series, we went back through the intake calls our account managers ran with engineering leaders from late June through mid-November 2026 and pulled out the hiring problems that kept coming up. The quoted lines come from our notes on those calls, redacted so nobody's program, site or team can be identified. If you run semiconductor, embedded firmware, board or mechanical teams, a few of these are probably on your desk right now.

1. What Happens When a Tape-Out Date Is on the Line?

The most urgent calls we took this year came with a date attached. One semiconductor team told us they faced "potential timeline slips for a tape-out milestone around December if the role remains unfilled." Their loop was already set: a screen with the hiring manager, then a panel with four leads.

A fixed date and a full panel can pull against each other. Every week it takes to get four leads in a room comes straight off the schedule, and the engineers you want are interviewing somewhere else in the meantime. If your milestone is real, say so on the first call and block the panel time before the first resume lands.

2. The Program Ramp Arrived Before the Headcount

Growth was the reason we heard most often for a new req this year, even ahead of backfills. An aerospace electronics leader described "massive staffing deficits and upcoming program ramps across PCB layout, [harness] design, and electrical test teams." Another manager was trying to grow a team quickly before year end and was already paying for the wait in "missed customer deliverables."

Our placement data points the same way. From January 1 through November 15, 2026, the average engineering req we worked called for 1.84 openings, up from 1.50 in 2025. One requisition now often means a team's worth of work, and a team's worth of interviews. Approve and schedule the whole req at once, or the second and third seats end up waiting behind the first.

3. Full-Time Hiring Was Too Slow, so They Opened Contract Seats

A team designing a new generation of chips from scratch told us a "slow full-time hiring pace led to opening contractor positions." They did not sugarcoat the cost of waiting either: "Project completion will be delayed as the team is swamped." On a different call, a manager said contract-to-hire was "the preferred route for this engagement."

For several of the teams we worked with, contract was the next move once a full-time search stalled. Contract-to-hire keeps the door open for both sides, and it lets you see the engineer do the actual work before you commit the headcount.

4. A Retirement Left a Hole Nobody Else Could Fill

Some of the most thoughtful calls this year started with someone leaving. One manager was planning around "an upcoming employee retirement planned for [early 2027]" and wanted a contractor in early "to allow for a proper training and handover period." Another was backfilling a senior staff engineer retiring at year end, on a contract-to-hire path. A third described a division split and "recent retirements" that left shared resources unavailable.

Knowledge transfer takes calendar time, and you cannot compress it after the farewell lunch. Calling early and building in overlap gives the handover the calendar time it needs.

5. Your Best People Were Already Covering the Gap

Before most of these teams called us, they were making do. One manager said several new programs needing advanced PCB layout had "stretched existing designers thin," and if the seat stayed open, "program delivery schedules would slip." Another described a team "overloaded with incoming work and missing deadlines."

'Making do' has a quiet cost, because the people covering the gap are usually your strongest, and it is not a state you can hold for long. When you write the req, note what is being covered today and by whom. That line puts a cost on the open seat that whoever approves the req can see.

6. Some Reqs Had Been Open for Months Before They Reached Us

Several reqs had sat open a long time before they came to us. One power electronics req had been open [more than a year] because of "challenges attracting niche power electronics talent" to its location. A board-level req had been posted since spring. Another manager told us internal recruiting had been searching for months before the work came to an outside partner.

Behind several of them sat a narrow bar, like a specific tool or a citizenship requirement. A broad posting can't screen for that. What moves a long-open req is a search built around the one or two things that actually disqualify people, run by someone who knows what those things look like on a resume.

7. Citizenship Requirements Thinned the Pool Fast

One board-level manager told us the req had drawn applicants for months, "mostly non-U.S. citizens who were disqualified." A different manager wanted "full capability to use tools without junior training," so whoever cleared the first bar still had a second one waiting.

If your program requires U.S. citizenship, permanent residency or a clearance, put it at the top of the req, not in paragraph six. We screen for it before anyone's calendar gets touched, and it spares everyone a disappointing conversation.

8. Five Days On Site Cost Some Teams a Hire

A team hiring for mechanical and thermal design had been interviewing for a while and finally extended an offer, which was "ultimately declined due to commute distance." On another req, a manager passed on an engineer who was "unable to be at work 5 days a week."

On-site work is often the right call for hardware, and the managers we talk to usually have good reasons, like lab access and secure spaces. Engineers weigh it just as seriously. If the role is five days on site, say so in the first sentence of the req and bring up the commute on the first call. That conversation is a lot cheaper than losing a finalist at the offer stage.

9. Several Agencies, One Req, the Same Resumes

Several managers told us other staffing firms were working the same req, sometimes a handful of them. The side effect showed up later, when one manager passed on an engineer with a short note: "Double submitted, another agency sent him first."

More vendors can feel like more coverage. In practice it often means the same engineers arriving from several directions, and you pay for it in screening time. A shortlist of 2-4 engineers you have not already seen is worth more than a stack of familiar names.

10. The Loop Decided Who Was Still Available

The fastest loops we saw this year belonged to the hiring manager: "a streamlined 30-minute technical screening with the hiring manager followed by SME review, allowing for rapid turnaround," or a phone screen and one technical interview "with feedback expected within 24 hours." The slower ones stacked rounds, and the cost showed up as people walking away. One team was restarting a search "after a candidate dropped out at the last minute." Another lost its preferred engineer to a counteroffer.

When engineering leaders interview Game 7 candidates, 2 in 3 get an offer. The managers who get the most out of that are the ones whose loop can reach a decision while the engineer is still available.

What Do These Ten Problems Have in Common?

Read the list again and most of these were visible weeks before the req went out: the date, the retirement, the on-site requirement, the citizenship rule. When a manager names them on the first call, we can get to a shortlist faster, with fewer interviews spent on people who were never going to fit.

So what's sitting on your team right now that hasn't turned into a req yet? And who's covering it in the meantime?

If you are planning semiconductor, embedded firmware, board or mechanical seats for Q1 in 2027, tell us what you're building. We'll come back with 2-4 engineers who've done the work and meet your requirements.


This post is part of our 2026 Hiring Notes In Review, five pieces built from what hiring managers and engineers told us this year.

FAQ

Frequently Asked Questions

Why do companies hire contract engineers instead of full-time employees?

On our 2026 intake calls, the most common reasons were program ramps that arrived before headcount, schedule-critical milestones such as tape-outs, retirements that needed a handover, and full-time searches that moved too slowly. Contract and contract-to-hire seats let a team add the skill now and decide on permanent headcount later.

Why is the engineering hiring process taking so long?

The hiring managers we talked with in 2026 pointed to narrow requirements (a specific tool, a domain or U.S. citizenship), stretched teams with little time to interview, and multi-round panels. The fastest loops we saw were a short screen with the hiring manager, an expert review and a quick decision.

What should a hiring manager tell a staffing firm on the first call?

Tell them what is already visible before the req goes out: the milestone date, any retirement or handover, the on-site requirement, and any U.S. citizenship, permanent residency or clearance rule. On our 2026 intake calls, naming those up front let the search screen for them before anyone's calendar was touched.

Jason Eisenberg

Written by

Jason Eisenberg

Head of Marketing